| Production Rate |
55 loads per hour |
| Machine Dimensions |
109.5 ” L x 51 ” W x 99 ” H |
| Maximum Load Size |
51 ” L x 51 ” W x 80 ” H |
| Load Weight |
5,000 Lbs |
| Approximate Shipping Weight |
1,400 Lbs |
| Pneumatic Requirements |
3 cfm @ 80 psi |
| Electrical Requirements |
120 V / 1 ph / 60 Hz 15 A |
| Controls |
- Allen Bradley MicroLogix 1200 PLC
- 24V control system
- Current overload protection
- NEMA 4/12 control cabinet
- Autoheight sensing photoeye
- Power on/off switch and status light
- Start/stop push button
- Large emergency stop (push / pull type)
- Manual carriage up/down function
- Variable table speed (16 RPM) with automatic home position
- Separate up/down carriage speeds adjustment
- Separate top and bottom wrap selectors (0-9)
- Reinforced wrap/manual rotation control
- Film tension adjustment
- Top cover pause switch (Splash proof program)
- Mode switch (Manual or Automatic)
- Pull cord with 40′ of cable (to be installed by customer)
- Separate station on front of tower with clamp jog and an additional e-stop
- Lack of film alarm
|
| Structure |
- 14 gauge formed steel tower
- Forklift Portable base design
- Heavy duty structural steel construction
|
| Film Delivery System |
- 20″ NO-THREAD® Powered Pre-Stretch Carriage
- 1 HP AC motor with Allen Bradley variable frequency drive
- Lifetime warranty on pre-stretch rollers blue compound
- Film force release for easy pull at start and end of cycle
- 50-400% pre-stretch ratio (preset to customer spec, Std 200%)
- Electronic film tension control with analog sensor
- Film roping bar
- Lexan roller cover for operator safety
- Proximity sensor on carriage gate to ensure gate is properly closed
|
| Film Tail Treatment |
- Automated Cut/Clamp & Wipe system
- Pulse controlled cutter
- Film alignment arm & Brush on film tail treatment
|
| Film Carriage Drive |
- 1 HP AC motor with Allen Bradley variable frequency drive
- Two #50 carriage lifting chains enclosed in tower for safety
- Bearing supported maintenance free guide wheels
|
| Turntable |
- 51″ x 51″ octagonal table 3/8″ thick
- 13 5/8″ table height
- 4 casters with polyurethane coating and tapered roller bearings
|
| Turntable Drive |
- 0-16 RPM variable speed
- 1 HP AC motor with Allen Bradley variable frequency drive
- #50 ANSI heavy duty chain drive
- Electronic soft start/stop
- Positive turntable alignment controlled by proximity sensor
|
| Technical Information |
The machine is provided with a manual including electro/mechanical schematics and drawings, troubleshooting guide & installation instructions. |
