Production Rate
50 loads per hour
Machine Dimensions
135.50″ L x
130″ W x
120″ H
Maximum Load Size
56″ L x
56″ W x
80″ H
Load Weight
Unlimited
Approximate Shipping Weight
2300 lbs
Electrical Requirements
120 V /
1 ph /
60Hz
15A
Air Requirements
3 cfm @
80 psi
Controls
Allen Bradley MicroLogix 1200 PLC
24V control system
Current overload protection
NEMA 4/12 control cabinet (can be located up to 10′ from machine frame)
Autoheight sensing photoeye
Power on/off switch and status light
Start/stop push button
Large emergency stop (push / pull type)
Manual carriage up/down function
Variable rotary arm speed (12RPM)
Separate up and down carriage speeds
Separate top and bottom wrap selectors
Reinforced wrap/manual rotation control
Positive arm alignment controlled by proximity sensor
Top cover pause switch (Splash proof program)
Spiral up or spiral up/down switch
Film force to load control
Emergency stop sensor for arm path obstruction
Mode switch (Manual or Automatic)
Pull cord with 40′ of cable (to be installed by customer)
Separate station on front of tower with clamp jog and an additional e-stop
Lack of film alarm
Structure
Heavy duty structural steel construction
Column mounting design
Floor and top frame mounting
Easy access to all components
Anchoring Requirements
Wulftec recommends using heavy-duty expansion shields of 3/4″ diameter
thread size with a minimum anchor depth of 4″ in concrete. To be I-beam (6″ to 8″) mounted,
there are 2 anchors at the bottom and also 2 bolts on the top of the machine frame.
Film Delivery System
20″ NO-THREAD® Powered Pre-Stretch Carriage
1 HP AC motor with Allen Bradley variable frequency drive
Lifetime warranty on pre-stretch rollers blue compound
Film force release for easy pull at start and end of cycle
50-400% pre-stretch ratio (preset to customer spec, Std 200%)
Electronic film tension control with analog sensor
Lexan roller cover for operator safety
Angled carriage to wrap approximately 2″ from floor level
Proximity sensor on carriage gate to ensure gate is properly closed
Film Carriage Drive
1 HP AC motor with Allen Bradley variable frequency drive
Two #50 carriage lifting chains
Dual 1/2″ CRS ways with UHMW-PE carriage glides
Dual structural steel supporting boom
Power track for efficient guiding of wires
Film Tail Treatment
Automated Cut/Clamp & Wipe system
Pulse controlled cutter
Film alignment arm & Brush on film tail treatment
Rotary Arm Drive
Heavy duty 25″ ring gear with pinion gear drive
1 HP AC motor with Allen Bradley variable frequency drive
0-12 RPM variable speed
Electronic soft start/stop
Positive arm alignment controlled by proximity sensor
Protection guard over the ring gear
Technical Information
The machine is provided with a manual including electro/mechanical schematics and drawings,
troubleshooting guide & Installation instructions
Notes:
Optional
Production rate based on load configuration and machine options
Overall dimensions of machine in operation
All machine specifications are subject to change without prior notice
Please consult your distributor for prices.
Please note that retrofits are to be installed by a Certified Wulftec Technician.
